PAD System

Allows users to obtain or modify information about the length of the selected segment(s).

Video:https://www.youtube.com/watch?v=5QQ39AO9jcM

- Select the desired segment(s);
- Select tool;
- Click one of the extremities of selected segment (takes this point as fixed start point, then the other is end point)
- Dialog box opens, enter desired value or select option (if no option is selected, the added measurement is added proportionally to the entire segment), then click [OK]

- Distance to add on axis:

Distance in X >

Distance in Y > 2. Do not move extreme points:

3. Move the end point only:

4. Move on X only:

5. Move on Y only:

- Select the desired segment
- Hold down Alt (Windows) or Option (Macintosh) or Alt+Windows (Linux) key, click one of the extremities on the segment (first-click point as fixed start point, the other is end point)
- Click the fixed point where the measurement starts. The point must be at the extremity of a segment. The Graded Segment Lengths dialog box appears. It displays the measurements of all sizes, double-click to select the size(s) to be modified, or click the value and click [Modify] button to change it;
- After modification, click [OK] button.