The below steps are detailed for the V6.0 version. If you are using V7.0, the steps will be slightly different.

Measurement chart:

- Open Pattern Design software and create a new file, then click menu [Options]-[Preference], select the unit (in/ cm / mm) in your need.
- Select 25% display scale on the bottom left corner.
- Select tool, hold down the “Alt” (Windows) or “Option” key, left click the mouse and the dialog box appears. Enter the value: Width:15.5cm (6.1in), Height:8.5cm (3.35in), click “OK” to create the rectangle:

4. Use tool to select segment”A”, select tool, left click the selected segment, enter the value: 2 in the appearing dialog box, click “OK”, then you can get the equal diversion point “A”:

5. Use tool to select segment “B”, select , left click the selected segment, enter the value: 2 in the appearing dialog box, click “OK”, then you can get the equal diversion point “B”:

6. Use tool to select segment “C” and “D”, select tool, hold down the “Alt”(Windows) or “Option” (Macintosh) key, left click the start point, then the dialog box appears, select “Horiontally” and input the value 4.7cm or 1.85in, click “OK” to get point “C” and “D”:

7. Use tool to select segment “A”, select tool ,left click the start point, the dialog box appears, input the value 1.4cm or o.55in in the “Distance” column, click “OK” to create new point “A”.

8. Use tool to select segment “B”, select tool, left click the start point, the dialog box appears, enter the value “1.1cm or 0.433in” in the Disatance column, click “OK” to create the new point:

9. Use tool to select the whole piece, click the menu “Treatment”> “Points”> “Regular” to turn the new points to regular points:

10. Select tool, hold down the “Shift” key, select A, B, C, D point, hold down “Backspace” (Windows) or “Delete” (Mac) to delete the selected points:

![br014](pattern_tutorial/_static/Bra_basic_block/br014.png)

- Use to select point “A”, hold down the “Ctrl + Alt” (Windows) or “Command + Option” (Mac), left click the “Pointer” tool icon , the dialog box appears, enter the value “0.2cm or 0.08in” in the “Distance X” column, click “OK”:

![br015](pattern_tutorial/_static/Bra_basic_block/br015.png)

- Use to select point “B”, hold down the “Ctrl + Alt” (Windows) or “Command + Option” (Mac), left click the “Pointer” tool icon , the dialog box appears, enter the value “0.15cm or 0.06in” in the “Distance X” column, click “OK”:

![br016](pattern_tutorial/_static/Bra_basic_block/br016.png)

- Select tool to bends the four segments separately: left click the segment (hold on and do not release) drag the mouse to cruve shape.

![br018](pattern_tutorial/_static/Bra_basic_block/br018.png)

- Select tool, left click the cruve (left click the position on the curve where you want to add point), then the regular point be added and the cruve be segmented. You can use tool to drag the point to change the position of the point and then change the cruve shape in need.

![br020](pattern_tutorial/_static/Bra_basic_block/br020.png)

- The under cup piece be finished with the above steps:

![br021](pattern_tutorial/_static/Bra_basic_block/br021.png)

- Select tool, hold down the “Alt” (Windows) or “Option” (Macintosh) key, left click the mouse, the dialog box appears, enter the value “16cm or 6.3in” in the “Width” clumn, enter the value “28cm or 11.02in” in the “Height” clumn, click “OK”:

2. Use tool to select segment “A”, select , left click the start point, the dialog box appears, enter the value “7.7cm or 3.03in” in the “Distance” column, click “OK” to get the new point:

3. Use tool to select segment “B”, select , left click the start point, the dialog box appears, enter the value “4cm or 1.58in” in the “Distance” column, click “OK” to get the new point:

4. Use tool to select segment “B”, select , left click the start point, the dialog box appears, enter the value “2cm or 0.78in” in the “Distance” column, click “OK” to get the new point:

5. Use tool to select segment “B”, select , left click the start point, the dialog box appears, enter the value “2cm or 1.38in” in the “Distance” column, click “OK” to get the new point:

6. Use tool to select the whole piece, click the menu “Treatment”> “Points”> “Regular” to turn the new points to regular points:

7. Use tool to select segment “A”, hold down the “Ctrl+Alt” (Windows) or “Command+Option” (Mac)key, left click the “Pointer” tool icon , the dialog box appears, enter the value “0.8cm or 0.315in” in “Distance X” column, click “OK” to move point “A” to the right.

8. Use tool to select segment “A”, select tool, left click the start point, the dialog box appears, enter the value “4cm or 1.58in”, click “OK” to get the new point:

9. Use tool to select A,B,C points, press “Backspace” (Windows) or “Delete” (Mac) key to delete the selected points:

10. Use tool to select point “A”, hold down “Ctrl+Alt” (windows) or “Command+Option” (Mac) key, left click the “Pointer” tool icon , the dialog box appears, enter the value “-2cm or -0.79in”, click “Ok” to move point “A” to the left.

![br032](pattern_tutorial/_static/Bra_basic_block/br032.png)

- Use to select segment “A”, select tool, left click the start point, the dialog box appears, enter the value “12cm or 4.72” in the “Distance” column, click “OK” to get the new point:

![br033](pattern_tutorial/_static/Bra_basic_block/br033.png)

- Select tool, click point “A” and “B” one by one, then point “B” aligned to point “A”:

![br035](pattern_tutorial/_static/Bra_basic_block/br035.png)

- Select tool to bends the A,B,C segments separately : left click the segment (hold on and do not release) drag the mouse to cruve shape:

![br036](pattern_tutorial/_static/Bra_basic_block/br036.png)

- Select tool, left click the cruve (left click the position on the curve where you want to add point), then the regular point be added and the cruve be segmented. You can use tool to drag the point to change the position of the point and then change the cruve shape in need.
- The uper cup piece be finished with the above steps:

- Select tool, hold down “Alt” (Windows) or “Option” (Mac), left click the mouse, the dialog box appears, enter the value “2.7cm or 1.06in” in the “Width” column, enter the value “5cm or 1.97in” in the “Height” column, click “OK”:

2. Use tool to select point “A”, hold down the “Ctrl+Alt” (Windows) or “Command+Option” (Mac) key, left click the “Pointer” tool icon , the dialog box appears, enter the value “-0.6cm or -0.24in” in the “Distance X” column, click “OK” to move down point “A”:

3. Use tool to select segment “A”, select tool, left click the start point, the dialog box appears, enter the value “0.25cm or 0.1in” in the “Distance” column, click “OK” to get the new point:

4. Use tool to select point “A”, hold down the “Ctrl+Alt” (Windows) or “Command+Option” (Mac) key, left click the “Pointer” tool icon , the dialog box appears, enter the value “-0.15cm or -0.059in” in the “Distance X” column, click “OK” to move down point “A”:

5. Use tool to select segment “A”, select tool, left click the start point, the dialog box appears, enter the value “1cm or 0.394in” in the “New Length” column, check “Move on X only” item, click “OK”: > 6. Use tool to select the whole piece, click the menu “Treatment”> “Points”> “Regular” to turn the new points to regular points:

7. Select tool to bends the A,B segments separately : left click the segment (hold on and do not release) drag the mouse to cruve shape:

8. Use tool to select the center line, select tool, left click the selected line to unfold the center front piece:

9. Finish the center front piece with the above steps:

- Select tool, hold down the “Alt” (Windows) or “Option” (Mac) key left click the mouse, the dialog box appears, enter the value “21.5cm or 8.46in” in the “Width” column, enter the value “7.7cm or 1.97in” in the “Height” column, click “OK”:

2. Use to select point “A”, hold down “Ctrl+Alt” (Windows) or “Option+Command” (Mac) key, left click the “Pointer” tool icon , the dialog box apperas, enter the value “1.5cm or 0.59in” in the “Distance X” column, click “OK” to move point “A” to the right:

3. Use tool to select segment “A”, select tool, left click the start point, the dialog box appears, enter the value “3.5cm or 1.38in” in the “Distance” column, click “OK” to get the new point:

4. Use tool to select segment “A”, select , left click the start point, the dialog box appears, enter the value “1.5cm or 0.59in” in the “New Length” column, check the “Move on Y Only”, click “OK”:

5. Use tool to select point “A”, press “Backspace” (Windows) or “Delete” (Mac) key to delete the selected point:

6. Use tool to select the whole piece, click the menu “Treatment”> “Points”> “Regular” to turn the new points to regular points:

7. Select tool to bends the A,B,C segments separately : left click the segment (hold on and do not release) drag the mouse to cruve shape:

8. Select tool, left click the cruve (left click the position on the curve where you want to add point), then the regular point be added and the cruve be segmented. You can use tool to drag the point to change the position of the point and then change the cruve shape in need.

9. Finish the back piece with the above steps: