Differences

This shows you the differences between two versions of the page.

--- en:utilities:digitizer_manager:digitizer_manager_ch5 [2026/01/21 06:47] – created administrator
+++ en:utilities:digitizer_manager:digitizer_manager_ch5 [2026/01/26 09:39] (current) – administrator
@@ Line 8: / Line 8: @@
 . Menu > Options > Device Configuration.
+{{:en:utilities:digitizer_manager:genric01_en.png?400|}}
 . Add > Generic driver.
+{{:en:utilities:digitizer_manager:genric02_en.png?400|}}
+{{:en:utilities:digitizer_manager:genric03_en.png?400|}}
 After configuring the Generic driver information, click Next.
 This table contains default settings. If you don't have specific requirements, you can use the following settings as a starting point.
+{{:en:utilities:digitizer_manager:genric04_en.png?400|}}
 . Digitizer Configuration Wizard
@@ Line 22: / Line 30: @@
 *If the imported paper pattern size is incorrect, it may be due to an incorrect unit.
+{{:en:utilities:digitizer_manager:genric05_en.png?400|}}
 B. Report Format
@@ Line 33: / Line 43: @@
 a. If the length is unknown, the length value needs to be changed for testing. For example, selecting 18 for testing.
-b. After checking "Import Settings", select "Grapher Port" and then click "Import Parameters".
+{{:en:utilities:digitizer_manager:genric06_en.png?400|}}
+b. After checking "Load Settings", select "Digitizer Port" and then click "Load Parameter".
+{{:en:utilities:digitizer_manager:genric07_en.png?400|}}
+C. Press any mouse button on the digitizer table. If the number format shown in the image below appears in the blank column, the length setting is correct. If incorrect, press the "Finish" button each time, change the length value, and then press the button again to try.
+{{:en:utilities:digitizer_manager:genric08_en.png?400|}}
+d. After confirming the length is correct, if there is a graphic version for each length, press the arrow keys to select the settings for each key at this time.
-C. Press any mouse button on the graph reader. If the number format shown in the image below appears in the blank column, the length setting is correct. If incorrect, press the "Finish" button each time, change the length value, and then press the button again to try.
+{{:en:utilities:digitizer_manager:digit_photo_length_setting_en.png?400|}}
-d. After confirming the length is correct,
+. Then, press each key sequentially on the digitizer table. The data for each key will appear in the blank column.
-. Then, press each key sequentially on the chart reader. The data for each key will appear in the blank column.
+{{:en:utilities:digitizer_manager:genric09_en.png?400|}}
-Once completed, you can try pressing the keys to read the image.
+Once completed, you can try pressing the keys to input the patterns.