PAD System

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Chapter 3: Functions of Tools ======

  * [[marker_design_ch3_tool#Function of the Tools]]
    * [[marker_design_ch3_tool#Pointer]]
    * [[marker_design_ch3_tool#Zoom In/Out]]
    * [[marker_design_ch3_tool#Block a Piece]]
    * [[marker_design_ch3_tool#Cut Down Two Pieces]]
    * [[marker_design_ch3_tool#Magnetic Cursor]]
    * [[marker_design_ch3_tool#Cut with Angle]]
    * [[marker_design_ch3_tool#Modify Blocking Contour]]
    * [[marker_design_ch3_tool#Fill a Hole]]
    * [[marker_design_ch3_tool#Text]]
    * [[marker_design_ch3_tool#Ruler]]
    * [[marker_design_ch3_tool#Convert Notch]]
  * [[marker_design_ch3_function#Keypad]]
    * [[marker_design_ch3_function#Push Up|Push Up]]
    * [[marker_design_ch3_function#Push Down]]
    * [[marker_design_ch3_function#Push Left]]
    * [[marker_design_ch3_function#Push Right]]
    * [[marker_design_ch3_function#Rotate]]
    * [[marker_design_ch3_function#Horizontal Symmetry]]
    * [[marker_design_ch3_function#Vertical Symmetry]]
    * [[marker_design_ch3_function#Gap]]
    * [[marker_design_ch3_function#Overlap]]
    * [[marker_design_ch3_function#Fine Rotate CCW]]
    * [[marker_design_ch3_function#Fine Rotate CW]]
    * [[marker_design_ch3_function#Standby]]
    * [[marker_design_ch3_function#Slide Piece]]
    * [[marker_design_ch3_function#Force Piece]]