Differences

This shows you the differences between two versions of the page.

--- en:utilities:plot_manager:plot_manager_ch5 [2026/01/08 08:27] – [Chapter 7. PadSystem Plotter Setup] administrator
+++ en:utilities:plot_manager:plot_manager_ch5 [2026/02/03 04:12] (current) – [2. Adding a Printer/Plotter] administrator
@@ Line 1: / Line 1: @@
-=====Chapter 7. PadSystem Plotter Setup =====
+=====Chapter 5. Configure the plotter in the PAD System software =====
+==== 1. Introduction ====
-==== **1. Introduction** ====
 This manual explains how to connect and configure a plotter in PadSystem software. It covers local and network connections, paper setup, and troubleshooting tips to ensure smooth plotting operations.
-==== **2. Adding a Printer/Plotter** ====
+Note: Ensure that the power cord and signal cable are securely connected between the plotter and the computer before configuring the software. Also, confirm that the plotter power is turned on.
+==== 2. Adding a Printer/Plotter ====
+In the pattern or Marker software: Go to File > plot > Plot-Plot item
+In the Plot manager software: Go to Option > device configuration > Plot-Plot item
 When customers click Add Printer in PadSystem, they are prompted to select the type of device:
-   *   **Local Plotter** → For plotters connected directly via USB, serial, or parallel port.
+  *   **Local Plotter** → For plotters connected directly via USB, serial, or parallel port.
-  *    **Local Printer** → For standard desktop printers connected locally.
+  *    **Local Printer** → To have Windows drivers for printers connected locally.
   *    **Network Printer** → For devices shared over LAN or connected via IP address.
   *    **Pad Pen Plotter Cutter** → For PadSystem’s specialized pen plotter/cutter.
+ {{:en:utilities:plot_manager:p01.png?400|}}
 **Decision Tip:**
 Choose based on how the hardware is physically connected.
-==== **3. Connecting to a Local Port** ====
+==== 3. Connecting to a Local Port ====
-   *  Click **Add Printer**.
+   *  Click **Add > Printer**.
-  *   Select **Local Plotter**.
+  *   Select **Add > Local Plotter**.
   *   Choose the correct port:
@@ Line 34: / Line 42: @@
   *   Confirm the port matches the one shown in **Windows Device Manager**.
-==== **4. Configuring Plotter Settings** ====
+==== 4. Configuring Plotter Settings ====
 **Paper Size**
@@ Line 54: / Line 62: @@
   * If not listed, select a compatible driver or install the manufacturer’s driver.
-==== **5. Testing the Connection** ====
+==== 5. Testing the Connection ====
   * Send a **test plot** from PadSystem.
@@ Line 62: / Line 70: @@
   * Adjust paper settings if output is misaligned.
-==== **6. Troubleshooting Guide** ====
+==== 6. Troubleshooting Guide ====
 **Common Issues**
@@ Line 81: / Line 89: @@
-==== **7. Frequently Asked Questions (FAQ)** ====
+==== 7. Frequently Asked Questions (FAQ) ====
   *  **Q: Can I use multiple plotters?**
@@ Line 89: / Line 97: @@
   *  **Q: What if my plotter model isn’t listed?**
-  * A: Install the manufacturer’s driver and select a compatible option.
+  * A: Install the manufacturer’s Windows driver and select a compatible option.
   *  **Q: How do I connect over Wi-Fi?**
@@ Line 95: / Line 103: @@
   * A: Use the Network Printer option and enter the plotter’s IP address.
-==== **8. Appendix** ====
+==== 8. Appendix ====
 **Glossary**